GOLD RUSH Billet & Metal Coat [KG217]
GOLD RUSH Billet & Metal Coat
[KG217]
Our Price: 5,000Yen(tax excluded)
GOLD RUSH Billet & Metal Coat
Aluminum & Metal Parts Exclusive Hard Coating Agent
This is a specially formulated hard-type coating for aluminum and metal parts, designed to repel water and maintain a long-lasting shine. It protects against dullness and rust over an extended period, keeping parts looking their best. Thanks to its excellent water-repellent properties, it prevents dirt adhesion and makes wiping after washing significantly easier.
Recommended for bumpers, billet wheels, MOON DISCs, and other aluminum or metal car parts.
Also ideal for motorcycles!
Even on hairline-finished aluminum parts like MOON DISC—where fingerprints and oil stains tend to stand out—this coating prevents marks and allows for easy cleaning. Just wipe it down and you’re good to go, saving you time during every wash.
The formula penetrates even micro-level surface irregularities to form a protective film that prevents oxidation and rust. The high-hardness titanium component bonds firmly to the surface, delivering long-lasting performance.
With heat resistance up to 700°C, it can even be applied to mufflers.
Contents:
BILLET AND METAL COAT (20ml)
2 × Application Sponges
1 × Wiping Cloth
Application Coverage:
One bottle covers approximately 16 wheel disk surfaces
(*Coverage may vary depending on wheel design and size.)
※※ ATTENTION ※※
When applying to areas like bumpers, take care not to get the liquid on the vehicle body. If there is a risk of contact, please use masking tape to protect surrounding surfaces.
If it does accidentally get on unintended areas, wipe it off immediately with a damp towel before it hardens.
【HOW TO USE】
STEP 1:
Thoroughly clean and dry the surface. Remove all dirt, dust, and moisture. For optimal surface preparation, we recommend using Shake Morley Metal Polish [KG140]、 GOLD RUSH Car Wash Shampoo [KG202]、 GOLD RUSH Car Wash Mitt [KG208].
After polishing and washing, degrease the surface using silicone remover or similar products to ensure better coating adhesion.
STEP 2:
Shake the bottle gently. Apply the liquid once back and forth on the black side of the included sponge.
For spoke or wire wheels, use cotton instead of the sponge for easier application.
STEP 3:
Immediately after even application, use the included microfiber cloth to lightly wipe the surface to spread the coating evenly.
STEP 4:
After about 10 minutes, repeat Step 2 and Step 3 for a second layer.
Let the coating air dry completely.
(At 25°C: approximately 1 hour / In winter: 3 hours or more)
Aluminum & Metal Parts Exclusive Hard Coating Agent
This is a specially formulated hard-type coating for aluminum and metal parts, designed to repel water and maintain a long-lasting shine. It protects against dullness and rust over an extended period, keeping parts looking their best. Thanks to its excellent water-repellent properties, it prevents dirt adhesion and makes wiping after washing significantly easier.
Recommended for bumpers, billet wheels, MOON DISCs, and other aluminum or metal car parts.
Also ideal for motorcycles!
Even on hairline-finished aluminum parts like MOON DISC—where fingerprints and oil stains tend to stand out—this coating prevents marks and allows for easy cleaning. Just wipe it down and you’re good to go, saving you time during every wash.
The formula penetrates even micro-level surface irregularities to form a protective film that prevents oxidation and rust. The high-hardness titanium component bonds firmly to the surface, delivering long-lasting performance.
With heat resistance up to 700°C, it can even be applied to mufflers.
Contents:
BILLET AND METAL COAT (20ml)
2 × Application Sponges
1 × Wiping Cloth
Application Coverage:
One bottle covers approximately 16 wheel disk surfaces
(*Coverage may vary depending on wheel design and size.)
※※ ATTENTION ※※
When applying to areas like bumpers, take care not to get the liquid on the vehicle body. If there is a risk of contact, please use masking tape to protect surrounding surfaces.
If it does accidentally get on unintended areas, wipe it off immediately with a damp towel before it hardens.
【HOW TO USE】
STEP 1:
Thoroughly clean and dry the surface. Remove all dirt, dust, and moisture. For optimal surface preparation, we recommend using Shake Morley Metal Polish [KG140]、 GOLD RUSH Car Wash Shampoo [KG202]、 GOLD RUSH Car Wash Mitt [KG208].
After polishing and washing, degrease the surface using silicone remover or similar products to ensure better coating adhesion.
STEP 2:
Shake the bottle gently. Apply the liquid once back and forth on the black side of the included sponge.
For spoke or wire wheels, use cotton instead of the sponge for easier application.
STEP 3:
Immediately after even application, use the included microfiber cloth to lightly wipe the surface to spread the coating evenly.
STEP 4:
After about 10 minutes, repeat Step 2 and Step 3 for a second layer.
Let the coating air dry completely.
(At 25°C: approximately 1 hour / In winter: 3 hours or more)
Reviews
0 reviews
